山東省安裝工程消耗量定額解釋.rar

山東省安裝工程消耗量定額解釋
第一冊機械設備安裝工程
 1．定額中未包括大型設備吊裝所用的施工機械費用，請問什么樣的設備為大型設備？其所需的施工機械費用如何計算？
    答：大型設備是指整體設備重量大于60噸的設備。本冊定額中未考慮大型設備的吊裝機具，發生時應按施工方案另行計算。
    2．本冊中設備單機試運轉包括的內容是哪些？
    答：設備單機試運轉屬于整體設備安裝內容范疇。其工作內容應按相應"規范"中規定的為準；不包括機械設備部分以外各系統（如電氣、儀表、通風等系統）的試驗、調整、試運轉。單機試運轉所用的除水、電、氣、油、燃料需另計以外的其他材料、人工及機械均已包括在設備安裝定額內。
    3．本冊定額中是否包括設備單機試運轉時的配合電工？
    答：機械設備安裝定額內，已包括試運轉中所必須配合的電工。機械設備的電氣部分的安裝、調整、試驗、試運轉所需的電工，則包括在相應電氣安裝定額內。
    4．設備本體范圍內的管道及附件沒有隨設備配套供應，需現場進行配制后安裝，應怎樣計算該部分的制作安裝費？
Shandong Province to explain the installation of fixed consumption
Volume installation of machinery and equipment
 1. Fixed equipment not included in large-scale construction machinery used for hoisting the cost, I ask what kind of equipment for large equipment? The construction equipment required for the calculation of the cost?
    A: The large-scale equipment is the equipment in the weight of more than 60 tons of equipment. This book is not considered large scale lifting equipment machinery, construction time of the program should be counted.
    2. The volume of equipment, including the contents of the single test run what?
    A: The equipment belongs to the whole installation commissioning single content area. The content of their work should be corresponding "standard" in the subject under; does not include machinery and equipment other than parts of systems (such as electrical, instrumentation, ventilation system) testing, adjustment, commissioning. Used stand-alone addition to commissioning of water, electricity, gas, oil, fuel, pay extra than other materials, labor and machinery are included in the fixed installation inside.
    3. Fixed in this book are included with the device when the stand-alone commissioning electrician?
    A: The installation of fixed machinery and equipment, which has been included in the commissioning electrician must meet. Electrical parts of machinery and equipment installation, adjustment, testing, commissioning the necessary electrical, are included within the corresponding fixed electrical installation.
    4. Body within the pipeline equipment and accessories not matching supply with the equipment, be installed after site preparation, how to calculate the part of the production installation fee?
 

前往下載