裝載機安全技術操作規程巖土.doc

1、 裝載機發動前要檢查發動機的油量，水量是否加足。并將各操作桿放在空檔位置，經檢查合格再發動機
器低速運轉，同時檢查各種儀表是否正常。
2、 堅持例行保養，機械經常保持完好，機件失靈，必須檢修好，在機械運轉中，禁止進行清潔、緊固、潤
滑、調整等各項工作。
3、 裝載機在開車前，注意檢查周圍是否有障礙物和危險物，對工作地段有影響施工的障礙物等必須事先清
除后再進行工作，酒后禁止開車。
4、 操作機械時，司機必須精力集中，不準吸煙和與他人玩笑打

1, loader launched to check the engine oil before, whether to add a little water. And the operating lever on the neutral position, after inspection and approval, and then the engine
Low-speed devices operate at the same time checking the various instruments are normal.
2, adhere to routine maintenance, machinery maintained in good condition, mechanical failure, maintenance must be good, in the mechanical operation, the prohibition of cleaning, tightening, Run
Slide, adjust the other work.
3, loader before driving, pay attention to check whether there around obstacles and dangers, affect the construction work site must first clear obstructions such as
In addition to working again, drink driving ban.
4, operating machinery, the driver must concentrate, not allowed to fight smoking and joking with others

前往下載