高速公路施工組織設計.doc
進入下載頁
目錄
第一卷 高速公路施工組織設計 7
第一章 編制依據 7
第二章 工程概況 7
第一節 工程簡介 7
第二節 工程范圍及設計構造 7
一、 橋梁設計里程 8
二、 橋梁部分設計概況 8
三、 橋梁主要結構工程量匯總 8
四、 道路、下水道主要工程量匯總 8
第三節 現場及周邊建(構)物,道路交通及地下管線狀況 9
第四節 業主招標的工期要求 9
第三章 工程主要施工技術關鍵 9
第一節 路基和橋臺后填筑控制 10
第二節 立交橋梁結構清水砼的施工 10
第三節 空心板梁板底起拱度質量控制 10
第四節 現場攪拌砼的質量控制 10
第五節 預應力施工操作控制 11
第四章 施工的總體組織規劃 11
第一節 施工區域劃分和各區域現狀 11
一、 章節126 11
二、 道路下水道部分: 12
第二節 各施工區域的施工流程安排 12
第三節 勞動力資源計劃 13
第四節 材料資源投入計劃 13
第五節 主要施工機械、儀器設備的選型 14
一、 施工機械、儀器設備的選擇依據 14
二、 主要設備、器具配備表 14
第五章 各分項工程的施工順序和主要施工方法 16
第一節 各主要分項工程施工工序流程圖 16
第二節 施工程序網絡圖 16
第三節 本工程擬采用的主要施工方法 17
一、 下部結構 17
二、 上部結構 17
三、 橋面附屬系 18
四、 地面道路 18
五、 下水道 18
第六章 施工期間道路交通組織方案 18
第一節 ××路的圍場及交通組織 19
第二節 ××路圍場及交通組織 19
第三節 板梁吊裝時的交通組織 19
第七章 建(構)筑物、地下管線的保護措施 19
第一節 組織落實 20
第二節 措施制訂與執行 20
第八章 結構施工支架體系 22
第九章 主要工程項目的施工方案 22
第一節 測量定位放樣 22
一、 軸線測設 22
二、 標高測設 24
三、 測量儀器的檢測 25
第二節 樁基施工 25
一、 前期準備 25
二、 PHC管樁的予制及運輸 26
三、 PHC管樁打樁施工 26
四、 水上PHC管樁打設 27
五、 質量保證措施和質量檢驗標準 28
六、 打樁工程安全技術措施 29
第三節 承臺(橋臺)施工 29
一、 施工順序 29
二、 承臺圍護 30
三、 承臺挖土 30
四、 墊層施工 31
五、 樁頂截鑿 31
六、 承臺鋼筋 31
七、 承臺模板 32
八、 承臺砼 32
九、 基坑回填 33
十、 質量保證措施質量檢驗標準 34
第四節 立柱施工 34
一、 施工順序 35
二、 前期準備 35
三、 模板選型加工 35
四、 立柱定位、高程控制 35
五、 立柱鋼筋 36
六、 立柱模安裝與拆除 36
七、 立柱砼 37
八、 清水砼施工工藝控制 37
九、 現場攪拌砼質量控制 38
十、 質量保證措施和質量檢驗標準 40
十一、 立柱施工安全技術要求 40
第五節 蓋梁施工 41
一、 施工順序 41
二、 支架范圍內地基處理 41
三、 蓋梁定位 42
四、 蓋梁支架 42
五、 蓋梁非預應力鋼筋制作與綁扎 42
六、 鋼筋骨架加工要求 43
七、 蓋梁模板 43
八、 蓋梁砼 44
九、 蓋梁預應力張拉 44
十、 質量保證措施和質量檢驗標準 47
十一、 蓋梁施工安全管理 48
第六節 板梁、T梁施工 49
一、 施工準備 49
二、 板梁工廠加工 50
三、 板梁運輸 54
四、 T梁加工 54
五、 板梁吊裝 55
六、 T梁吊裝 56
七、 梁部砼構件質量及安裝檢驗標準 56
八、 安全技術措施 56
第七節 防撞墻施工 57
一、 施工順序 58
二、 前期準備 58
三、 支撐形式 58
四、 鋼筋綁扎 58
五、 模板 59
六、 砼澆筑 59
七、 防撞墻砼質量檢驗標準(允許偏差) 59
八、 防撞墻施工安全技術措施 60
第八節 橋面鋪裝施工 60
一、 前期準備 60
二、 鋼筋施工 60
三、 混凝土施工 60
第九節 附屬設施的施工安裝 61
一、 橋面伸縮縫 61
二、 落水管安裝 62
第十節 地面道路施工 62
一、 原地面清理和填前碾壓 63
二、 填方材料現場壓實試驗 63
三、 土路堤施工 63
四、 路基施工 65
五、 基層施工 66
六、 瀝青砼面層施工 67
七、 側平石及人行道板鋪設 68
八、 擋土墻施工 68
第十一節 排水工程施工 69
一、 溝槽開挖及支護 69
二、 溝槽排水 70
三、 鋪設管道 70
四、 管道接口 70
五、 磅水檢驗 71
六、 管道塢膀 71
七、 溝槽回砂、覆土 71
第十章 冬期、雨季施工措施 72
第一節 冬期施工措施 72
第二節 雨季施工措施 73
第十一章 工程質量管理措施 75
第一節 工程質量目標 75
第二節 工程質量管理組織體系 76
一、 質量管理三級監督組織體系 76
二、 施工過程三級質保體系人員責任落實細則 76
第三節 工程項目質量保證體系 80
第四節 保證工程質量的監控和程序控制體系 81
第五節 工程質量保證措施 81
一、 工程質量控制措施 81
二、 工程質量實施措施 81
第六節 嚴格執行監理程序 81
第十二章 工程工期管理措施 81
第十三章 工程安全管理措施 81
第一節 安全管理目標 81
第二節 安全管理網絡圖 81
第三節 安全生產保證體系 81
第四節 安全生產管理措施 81
第十四章 文明施工管理措施 81
第一節 文明施工管理目標 81
第二節 文明施工管理網絡 81
第三節 現場設施管理 81
第四節 勞務管理 81
第五節 文明施工與周邊居民、工廠、商店等的關系協調 81
第十五章 分項工程進度率計劃(斜率圖) 81
第十六章 工程管理曲線 81
第十七章 施工總平面布置 81
第一節 鋼筋加工場、材料及模具堆場等生產設施 81
第二節 生產設施場地 81
第三節 接電、接水布置 81
第四節 施工便道 81
第五節 圍場布置 81
第六節 排水組織 81
第七節 辦公生活設施 81
第八節 T梁預制場 81
第九節 試驗養護設施 81
第十節 現場宣傳 81
第十八章 施工工藝框圖 81
第一節 路基填筑施工(包括各類特殊路基處理) 81
第二節 路面底基層、基層施工 81
第三節 路面面層施工 81
第四節 81
第五節 橋梁鉆孔樁施工 81
第六節 先張法預應力梁施工 81
第七節 后張法預應力梁施工 81
第八節 連續箱梁施工 81
第九節 橋梁安裝施工 81
第十九章 分項工程生產率和施工周期表 81
第二十章 施工總體計劃表 81
第二十一章 附:施工總進度計劃橫道圖(二級計劃)及施工總進度計劃編制說明 81
第一節 施工總進度計劃橫道圖(二級計劃)(見后頁) 81
第二節 施工總進度計劃編制的指導思想及主要分項工程的施工計劃 81
一、 施工總進度計劃編制的指導思想 81
二、 主要分項工程的施工計劃 81
第三節 計劃工期的按排及工程主要節點的完成時間說明 81
Directory
Highway Construction Design Volume 7
Chapter 7 prepared according to
Project Overview Chapter 7
Brief Introduction of Section 7
Section II Project scope and design of structures 7
1, 8 miles bridge design
Second, the bridge part of the design profile 8
3, bridge aggregate principal amount of structural engineering 8
4, road, sewer aggregate principal amount of 8 projects
Section III site and the surrounding buildings (structures) materials, road traffic and underground pipeline status of 9
Duration of the tender requirements in section IV of the owners 9
Chapter 9 Key Engineering Technology in Construction
Section embankment and abutment 10 after the filling control
Section overpass beam construction Exposed Concrete 10
Hollow Section Beam quality control end 10 of Arching
Section IV-site quality control of concrete mixing 10
11 V Operation and Control of Prestressed Construction
Construction of overall organization of the Chapter 11 plan
Construction Section of the regional status of the regional division and 11
1, chapter 12 611
Second, roads, sewer parts: 12
Section II of the construction process of regional arrangements for the construction of 12
Section 13 of the labor resource planning
13 IV material resources into programs
V major construction machinery, equipment selection 14
1, construction machinery, equipment selection based on 14
Second, major equipment, appliances equipped with table 14
Chapter sub-project construction sequence and means in 16
Section I, the major sub-construction process flow chart 16
Network graph construction procedure of Section 16
Section III of the project's main construction method to be adopted 17
1, lower structure 17
Second, the upper structure 17
3, line 18, deck subsidiary
Fourth, the road surface 18
5, 18 sewer
Chapter VI program during the construction of 18 of the Road Traffic Organization
Section × × Road Traffic Organization paddock and 19
II × × Road paddock and Traffic Organization 19
Section III Girder Lifting 19 when the traffic organization
Chapter VII of the building (structures), 19 underground pipeline protection measures
Section 20 Organization of implementation
Section 20, formulation and implementation of measures
Chapter 22 in Construction Scaffolding System
Chapter IX major construction program of 22 projects
Section 22 setting out the position measurement
1, axis determination for 22
Second, elevation measurements of 24
Third, the detection of 25 measuring instruments
Section 25 of Pile Foundation Construction
First, preparation 25
Second, PHC pile of to the system and transport 26
3, PHC pipe piling construction 26
4, water 27 located PHC pile to play
5, quality assurance measures and quality inspection standards 28
6, piling Safety Measures 29
Section III caps (abutment) Construction of 29
First, the order of 29 construction
Second, retaining cap 30
3, cap 30 excavator
4, cushion construction 31
5, pile top 31 cut chisel
6, cap 31 steel
7, cap template 32
8, cap concrete 32
9, 33 pit backfill
10, quality assurance measures the quality of test 34
IV Construction of 34 column
First, the order of 35 construction
Second, preparation 35
Third, the template selection process 35
4, column location, elevation control 35
5, column 36 reinforced
6, column-mode installation and removal of 36
7, 37 concrete column
8, Concrete Construction Process Control 37
9, 38-site mixing of concrete quality control
10, quality assurance measures and quality control standards 40
11, column 40 construction safety requirements
V cap beam 41
First, the order of 41 construction
Second, the scope of the Mainland Foundation support 41
Third, capping beam positioning 42
4, cap beam support 42
5, cap beam prestressing steel production and non-banding 42
6, steel frame processing required 43
7, capping beam template 43
8, 44 concrete capping beam
9, cap beams prestressed tension of 44
10, quality assurance measures and quality control standards 47
11, 48, capping beam construction safety management
Section VI plate beam, T beam 49
1, 49 construction preparation
2, plate girder factory processing 50
3, plate beam transport 54
4, T beam processing 54
5, plate girder erection of 55
6, T Hoisting 56
7, Beam and the quality of concrete structures and installation of 56 test
8, 56, Safety Measures
Section VII bump wall construction 57
First, the order of 58 construction
Second, preparation 58
Third, support the form of 58
4, steel banding 58
5, template 59
6, 59 Pouring
7, anti against a wall of concrete quality control standards (tolerances) 59
8, Construction Safety Measures bump wall 60
60 VIII Bridge Deck Pavement
First, preparation 60
Second, the construction of 60 steel
Third, concrete construction 60
IX ancillary facilities construction and installation of 61
1, bridge expansion joint 61
2, 62, fell into the water pipe installation
Section X of the ground 62 road construction
First, the original ground clearance and pre-compacted fill 63
Second, fill material compaction test site 63
3, 63 embankment construction
IV Subgrade 65
5, 66 Base Construction
6, construction of 67 asphalt concrete surface
7, side panels laying flat stone and the pavement 68
8, retaining wall 68
Section XI 69 Drainage Construction
1, trench excavation and support 69
Second, the drainage grooves 70
Third, the laying of pipes 70
4, 70 channel interface,
5, 71 pounds of water testing
6, pipe dock bladder 71
7, grooves back to sand, overburden 71
Chapter winter, the rainy season construction measures 72
Section 72 of winter construction measures
Section 73 of the rainy season construction measures
Chapter XI 75, project quality management
Section 75, project quality objectives
Section 76, project quality management organization system
A quality management system of 76 3 Supervision Organization
Second, construction quality assurance system in three staff responsibility to implement the Rule 76
Section 80 Project Quality Assurance System
Section IV, quality assurance monitoring and process control systems 81
V project quality assurance measures 81
1, 81, project quality control measures
Second, the implementation of project quality measures 81
Strict implementation of the supervision procedure VI 81
Chapter XII project schedule management measures 81
Chapter XIII 81 engineering safety measures
Section 81 of the safety management objectives
Section 81 of the security management network map
Section 81 Safety Assurance System
81 IV safety management
Chapter XIV civilization construction management measures 81
Section 81 of civilized construction management objectives
Section 81 of civilized construction management network
Section 81-site facility management
Section IV of the Labor Management 81
V civilization construction and the surrounding residents, factories, shops, the relationship between the co-ordination 81
Chapter XV of the progress rate of sub-plans (slope of the graph) 81
81 Project Management Chapter XVI curve
Chapter XVII 81 general layout of construction
Section steel processing, materials and other production facilities in 81 yard die
Section 81 production facilities site
Section III then electricity, then water layout 81
81 IV pavement construction
V paddock layout 81
Section VI drainage Organization 81
81 VII office amenities
VIII T beam Prefabricated 81
81 IX test conservation facilities
81 of section X-site promotion
Chapter XVIII construction process diagram 81
Section roadbed construction works (including the various types of special subgrade treatment) 81
Section II of the road sub-base, base construction 81
Section 81 Construction of road surface
IV 81
81 V Bored Piles
Section VI pre-tensioned beam construction 81
Section VII of prestressed beam construction 81
VIII, 81 continuous box girder
81 IX Bridge Installation
Chapter XIX productivity and construction sub-project cycle Table 81
The overall construction schedule of Chapter 81
Chapter XXI-laws: general construction schedule bar chart (2 plans) and construction of the overall progress plan shows 81
Section total construction schedule bar chart (2 plans) (see below page) 81
Section II of the total construction schedule prepared by the guiding ideology and major sub-project construction program 81
First, the total construction schedule prepared by the 81 guiding principles
Second, the main sub-project construction program 81
Section III program and project duration arrange the completion of the main node description 81
