鐵器構件安裝工程安全作業交底.doc

內容摘要：
1、 吊運工作時，應注意被吊工作物的重量及使用鋼絲繩（千斤繩）的允許荷載力，并向吊機指揮人員說明吊物的目的地，并事先清理目的地周圍的障礙物。
2、 吊裝工作就位時，應注意安裝人員的手和腳，要做到穩、準。
3、 高空安裝工件時，要戴好安全帶、扣好保險扣，工件高空就位后要有臨時固定措施，各類工具、材料、配件應采取防止高處墜落的安全措施。
4、 使用各類移動電具（如電鉆、電板手、手提砂輪等）的電源插頭必須實施二級漏電保護。
5、 鐵器構件安裝中的電焊、氣割工作，應由有證的焊工進行，并辦理現場動火審批手續，配有專職人員進行現場消防監護。
6、 使用鐵錘前，應檢查手柄牢固狀況，敲打時不準戴手套。
7、 使用油泵千斤頂要注意壓力負荷，要墊平放直。
8、 使用撬棒要注意放穩和力的支點，防止滑脫，彈擊傷人，多人操作時要注意齊心協調。
9、嚴禁操作人員在酒后進入施工現場作業。
10、每個工人進入施工現場都必須頭戴安全帽。
11、班組如果因勞力不足需要再招新工人時，應事先向工地報告。
12、新工人進場后應先經過三級安全交底，并經考試合格后方可讓其正式上崗。
13、新工人進場應具有四證，即：職業資質證、身份證、計劃生育證和外來人口暫住證。
Abstract:
1, lifting work, should pay attention to the weight of objects suspended from work and the use of wire rope (extremely heavy rope) and allow the load force commanders instructions to the crane hoist the destination and destinations around the obstacle clearance in advance.
2, lifting the work place, attention should be installed on staff hands and feet, to be sure, accurate.
3, workpiece height when installed, to wear your seat belt fastened the insurance deduction, after the workpiece should be temporary fixed height measures in place, all kinds of tools, materials, accessories should take safety measures to prevent falling from height.
4, using various types of mobile electronic devices (such as drills, power wrenches, hand wheel, etc.) need to implement two power plug leakage protection.
5, iron components installed in the welding, gas cutting work should be of certified welders, and go through the on-site hot work procedures for approval, with a full-time staff on-site fire monitoring.
6, use the hammer, should check the status of the handle firmly, tap the time allowed to wear gloves.
7, using the oil pump jack should pay attention to pressure overload, to pad flat straight.
8, using the pry bar to pay attention to put the fulcrum of stability and strength to prevent slippage, playing the wounded people, people pay attention to work together to coordinate operations.
9, is strictly prohibited operators in the drink to the construction site work.
10, each worker entering the construction site must be wearing helmets.
11 team if the need to move because of a labor shortage of new workers, the report shall be submitted to the site.
12, after the admission of new workers should go through three security correspondent, and pass the examination before they can let the official posts.
13, the new approach should have four cards of workers, namely: professional qualification certificate, identity cards, birth certificates and residence permits.
 

前往下載