鋼結構及鐵件制作工程安全作業交底.doc

內容摘要：
1、大錘、小錘的木把應質地堅實、安裝牢固。
2、打錘時禁止手戴手套，二人打錘嚴禁相對站立。
3、多人抬材料和工件時要有專人指揮，精力集中，行動一致；互相照應，輕抬輕放，以免傷人，并應將道路清理好。
4、使用各種機械，要先進行各部檢查，試運轉正常，方可正式使用。
5、操作人員必須了解機械的性能及安全操作規程。
6、電焊工作地點5m以內不得有易燃、易爆材料。
7、為防止觸電必須遵守有關電氣安全規程。
8、氣焊、電焊應遵守氣焊安全操作規程，焊工必須持證上崗。
9、使用氣焊、電焊時邊上無監護人不得進行操作。
10、嚴禁操作人員在酒后進入施工現場作業。
11、每個工人進入施工現場都必須頭戴安全帽。
12、班組如果因勞力不足需要再招新工人時，應事先向工地報告。
13、新工人進場后應先經過三級安全交底，并經考試合格后方可讓其正式上崗。
14、新工人進場應具有四證，即：職業資質證、身份證、計劃生育證和外來人口暫住證。
Abstract:
1, hammer, hammer texture of solid wood to be installed firmly.
2, playing hammer against wearing gloves, two dozen hammer relative standing is strictly prohibited.
3 people have carried material and workpiece hand command, focus and action; care of each other, Qingtai gently to avoid injury, and the road should be cleared.
4, using a variety of machinery, to conduct inspection departments, commissioning normal before they come to use.
5, the operator must understand the mechanical performance and safe operation.
6, welding 5m within the workplace may not flammable and explosive materials.
7, in order to prevent electric shock must comply with the relevant electrical safety regulations.
8, gas welding, welding safety welding shall comply with operational procedures, welders must hold relevant certificates.
9, using gas welding, electric welding when the guardian can not operate without the edge.
10, prohibited operators in the drink to the construction site work.
11, each worker entering the construction site must be wearing helmets.
12 team if the need to move because of a labor shortage of new workers, the report shall be submitted to the site.
13, after the admission of new workers should go through three security correspondent, and pass the examination before they can let the official posts.
14, the new approach should have four cards of workers, namely: professional qualification certificate, identity cards, birth certificates and residence permits.
 

前往下載