中關村軟件園起步區土建工程施工組織設計.doc

第一章  工程概況

    1.1  工程概況
本工程為北京中關村軟件園起步區工程一階段合同（包括會展中心及管理中心工程），總占地面積15394.2 M2，由機械工業部設計研究院設計，其設計有關情況如下表：
會展中心及管理中心工程概況：
建筑面積 會展中心:21000 m2 /管理中心:12000 m2
檐高 12m
層數 地上三層，地下一層
結構形式 輕鋼結構
砌筑工程 紅機磚/陶粒砌塊
門窗工程 塑鋼門窗及鋁合金門窗
外裝修 鋁塑復合板幕墻/鋁合金玻璃幕墻
內裝修 樓面為橘紅大理石及寶山紅花崗巖
 隔斷墻為輕鋼龍骨雙面石膏板
 吊頂為輕鋼龍骨紙面石膏板
防水工程 SBS卷材防水/氯丁膠卷材防水
砼強度設計 墊層C10，結構C30
基   礎 獨立基礎
    鋼結構工程概況:綜合管理中心1115噸，會展中心1305噸，整個結構型式為框架結構，兩個建筑是三層結構。其中綜合管理中心占地7
Chapter Project Overview

    1.1 Project Overview
The project started in Beijing Zhongguancun Software Park, a stage on engineering contracts (including the Convention and Exhibition Centre and Management Centre project), the total area of 15394.2 M2, by the Ministry of Machine Design and Research Institute design, the design of the situation following table:
Convention and Exhibition Centre and Management Centre Project Overview:
Convention Center construction area: 21000 m2 / Management Center: 12000 m2
Eave height 12m
Three layers of the earth, ground floor
Light steel structure
Project Red Machine brick masonry / ceramic block
Plastic doors and windows and aluminum windows and doors windows and doors project
Outer wall decoration ACP / aluminum curtain walls
Interior decoration and marble floor for the orange red granite Baoshan
 Double wall partition gypsum board for the light steel keel
 Ceiling plaster board for the light steel keel
SBS waterproofing membrane waterproofing / chloroprene rubber waterproof membrane
Cushion design concrete strength C10, C30 structure
Independent foundation based
    Steel Works Profile: Integrated Management Center 1115 tons, 1305 tons Convention and Exhibition Centre, the whole structure type for the frame structure, the two buildings is three-tiered structure. Integrated management center which covers an area of 7
 

前往下載