主樓升降機施工方案.doc

主樓升降機施工方案
編號： ZJWJ/QEO-AHDW-SGFA-017
    1、升降機選型
    本工程施工人員和小型材料的垂直運輸主要通過升降機完成，考慮主樓施工層數和各樓層的工程量，擬采用型號為SCD200×200K，高度120m的升降機，安裝在主樓西面。
    2、升降機定位
    升降機安裝在地下室頂板上，位置確定在2～3交1/0A～A軸之間。機身與外架距離為20，附墻桿與A軸線框架梁預埋件連接，附墻桿安裝高度分別為11、19.55、27.85、35.75、43.65、51.55、59.45、67.35、75.45、83.8、92.4、99.2米標高位置.
    3、升降機基礎
    基礎平面尺寸為6m×4m，板厚為h=400mm，配筋Φ10@200，雙層雙向,混凝土強度C30。具體做法如下圖。
Main building lifts construction plan
ID: ZJWJ/QEO-AHDW-SGFA-017
    1, lift selection
    The construction and the vertical transport of small materials, mainly through the completion of the lift, consider the construction of floors and each floor of the main building of the project amount, to be adopted model SCD200 × 200K, height 120m lift, installed in the main building of the west.
    2, lift positioning
    Lift installed in the basement roof, the location identified in 2 or 3 axis AC 1/0A ~ A. Body and the outer frame distance of 20, with a wall rod and frame beam axis A link embedded parts, with a wall pole mounting height were 11,19.55,27.85,35.75,43.65,51.55,59.45,67.35,75.45,83.8,92.4 , 99.2 m elevation location.
    3, lift foundation
    Base plane size 6m × 4m, thickness is h = 400mm, reinforcement Φ10 @ 200, double two-way, concrete strength C30. Specifically, as shown below.
2009-8/主樓升降機施工方案.rar

前往下載