建筑電氣安裝工程.doc

交底內容：
建筑電氣安裝工程
(一)技術交底
電氣安裝工程中的各分項工程的技術交底均應包括以下內容：
1．對材料、設備的要求；
2．主要機具；
3．作業條件；
4操作工藝；
5．質量標準；
6．成品保護；
7．應注意的質量問題。
下面以半硬質塑料管暗敷設分項工程技術交底為例說明。
半硬質阻燃型暗敷設工程技術交底
本技術交底適用于一般民用建筑內的照明工程，不得在高溫場所及頂棚內敷設。
1．材料要求
(1)阻燃型塑料管及其附件其氧指數應符合消防規范有關要求，并有產品合格證。
(2)阻燃型塑料管的管壁應薄厚均勻，無氣泡及管身變形等現象。
(3)開關盒、插座盒、接線盒等塑料盒、箱均應外觀整齊、開孔齊全及無劈裂等現象。
(4)鍍鋅材料：扁鐵、木螺絲、機螺絲等。
(5)輔助材料：鉛絲、防腐漆、膠粘劑、水泥、砂子等。
2．主要機具
(1)鉛筆、卷尺、水平尺、線錘、水桶、灰桶、灰鏟。
(2)手錘、鏨子、鋼鋸、鋸條、刀鋸、木銼等。
(3)臺鉆、手電鉆、鉆頭、木鉆、工具袋、工具箱、高凳等。
Cards on the table contents:
Building Electrical Installation
(A) of the technical disclosure
Electrical installation work in each sub-project of the technical disclosure should include the following:
1. On materials, equipment requirements;
2. Major equipment;
3. Operating conditions;
4 operating processes;
5. Quality standards;
6. Product protection;
7. Should pay attention to quality issues.
The following semi-rigid plastic tube dark sub-project technical disclosure laying an example.
Semi-rigid flame retardant dark laying Technology Details
The technical disclosure for general lighting within the civil construction works shall be laid in high places and the roof.
1. Material requirements
(1) flame-retardant plastic pipes and accessories shall comply with the fire of its oxygen index specification requirements, and have product certification.
(2) flame-retardant plastic pipe wall should be Bohou uniform, no bubbles and the tube body deformation and so on.
(3) switch boxes, outlet boxes, junction boxes and other plastic boxes, cases should look neat, complete and non-split holes and other phenomena.
(4) Galvanized Material: flat iron, wood screws, machine screws and so on.
(5) support materials: wire, anti-corrosion paint, adhesives, cement, sand and so on.
2. Major equipment
(1) pencil, tape measure, spirit level, line hammer, a bucket, ash bucket, ash shovel.
(2) hand-hammer, chisel, hacksaw, saw blade, saw blade, wood file and so on.
(3) bench drill, hand drill, drill, wood drill, tool bags, tool, high stool so.
 

前往下載