配套管、配線安裝施工工藝標準.doc
進入下載頁
配套管、配線安裝
9.1 硬質阻燃塑料管(PVC)明敷設工藝標準
9.1.1 總則
9.1.1.1 適用范圍
本節適用于公用建筑、工廠、住宅等建筑物的電氣配管，可澆筑于混凝土內，也可明裝于室內及吊頂?shù)葓?chǎng)所；適用于室內或有酸、堿等腐蝕介質的場所照明配管敷設安裝(不得在40℃以上的場所和易受機械沖擊、摩擦等場所敷設)。
9.1.1.2 編制參考標準及規范
(1)《民用建筑電氣設計規范》(JCJ／T16-92)；
(2)《建筑電氣工程施工質量驗收規范》(GB50303-2002)。
9.1.2 施工準備
9.1.2.1 技術準備
(1) 熟悉圖紙資料，弄清設計圖的設計內容，注意圖紙?zhí)岢龅氖┕ひ蟆?br />
(2) 準備施工機具、材料。
(3) 確定施工方法，編制施工技術措施；為了工程施工，不破壞建筑物的強度和損害建筑物的美觀。
(4) 施工前要認真聽取工程技術人員的技術交底，弄清技術
And the pipe, wiring installation
9.1 Rigid plastic pipe flame (PVC) technology standards laid out
9.1.1 General
9.1.1.1 Scope
This section applies to public buildings, factories, residential and other buildings electrical piping, can be poured in concrete, it would be next installed on the interior and the ceiling and other places; suitable for indoor or acid, alkali and other corrosive media site lighting with pipe laying installation (not in place for more than 40 ℃ and vulnerable mechanical shock and friction, and the laying place).
9.1.1.2 Reference standards and specifications prepared
(1) "civil electrical design" (JCJ/T16-92);
(2) "Building Electrical Engineering Construction Quality Acceptance" (GB50303-2002).
9.1.2 Construction of preparation
9.1.2.1 Technical Preparation
(1) be familiar with drawing data, understand the layout of the design elements, drawing attention to proposed construction requirements.
(2) Prepare construction machinery, materials.
(3) determine the construction method, preparation of construction technology; for construction, does not undermine the strength and damage buildings beautiful buildings.
(4) to seriously listen to the pre-construction engineering and technical personnel of the technical disclosure, identify technology