池州電廠一期工程2×300MW發電機組工程投標施工組織設計..doc

施工組織設計

1.工程概述
1.1 工程簡況
池州電廠一期工程2×300MW發電機組，由安徽電建一公司于2003年7月22日中標承包施工，目前電建一公司池州電廠項目部已進駐施工現場并全面展開工作，砼預制樁具備招標條件。
1.2 工程范圍、內容及工程量
本標工程為池州電廠砼預制樁工程，樁型號為97G361圖集中的JZHb-250-1112CG(煙囪)及JZHb-250-1414CG(主廠房)，砼強度C40，單樁豎向承載力為1500kN。工程范圍、內容及工程量如下：
煙囪樁基：樁運輸(安慶老峰電廠至現場)，打、接、送砼預制樁(錘擊)、樁孔回填土施工、配合高低應變實驗。樁規格500×500×23000mm，約200根。
主廠房樁基：樁預制、施工現場運輸倒運及打樁、接樁、送樁(錘擊)、樁孔回填土施工、配合高低應變實驗。樁規格500×500×28000
Construction Design

1. Project Overview
1.1 Project Briefing
Chizhou Power Plant Phase 2 × 300MW generating units, by Anhui Electric Construction Company in the July 22, 2003 awarded the construction contract, the current electric company building a power plant project in Chizhou Department has entered the construction site and fully operational, concrete precast pile with the tender conditions.
1.2 The scope, content and quantities
The standard power plant projects Chizhou prefabricated concrete piles, pile model 97G361 Figure concentrated JZHb-250-1112CG (chimney) and JZHb-250-1414CG (main building), concrete strength C40, vertical bearing capacity is 1500kN . Scope, content and quantities are as follows:
Chimney pile: pile Transport (Anqing old peak power to the scene), play, receive and deliver precast concrete piles (hammer), Pile backfill construction, with high and low strain experiments. Pile size 500 × 500 × 23000mm, about 200.
Powerhouse pile: pile of prefabricated construction site transport out of luck and piling, the pile, sending piles (hammer), Pile backfill construction, with high and low strain experiments. Pile size 500 × 500 × 28000
 

前往下載